|
Constraints
|
| Angle |
Rotates the mullion profile. Works as an adjustment to the Position parameter. |
| Offset |
Sets the offset from the panels. |
|
Construction
|
| Profile |
Sets a profile for the mullion. You can create a custom profile family. |
| Position |
Rotates the mullion profile. Normal to Face is the usual condition. Parallel to Ground is appropriate for sloped curtain panels, such as in sloped glazing. |
| Corner Mullion |
Indicates whether the mullion is a corner mullion. See Corner Mullions. |
| Thickness |
Sets the thickness. If you have a loaded a custom profile, this value is calculated from the mullion profile. |
|
Materials and Finishes
|
| Material |
The material for the mullion. |
|
Dimensions
|
| Width on side 2 |
Sets the width of side 2. If you have a loaded a custom profile, this value is calculated from the mullion profile. |
| Width on side 1 |
Sets the width of side 1. If you have a loaded a custom profile, this value is calculated from the mullion profile. |
|
Identity Data
|
| Keynote |
Add or edit the mullion keynote. Click in the value box to open the Keynotes dialog. See Keynotes. |
| Model |
Definition of the mullion. |
| Manufacturer |
Definition of the mullion manufacturer. |
| Type Comments |
Mullion comments. |
| URL |
Sets applicable URL. |
| Description |
Mullion description. |
| Assembly Description |
Description of the assembly based on the assembly code selection. |
| Assembly Code |
Uniformat assembly code selected from a hierarchical list. |
| Type Mark |
Sets the mullion type mark. |
| Cost |
The mullion cost. |
| OmniClass Number |
The number from Table 23 of the OmniClass Construction Classification System that best categorizes the family type. |
| OmniClass Title |
The name from Table 23 of the OmniClass Construction Classification System that best categorizes the family type. |