|
Construction
|
| Structure |
Specifies a wall layer. Select the Edit button to add, change, or delete a wall layer. |
| Wrapping at Inserts |
Specifies the layer wrapping of walls at inserts. See Layer Wrapping. |
| Wrapping at Ends |
Specifies the layer wrapping of wall endcaps. See Setting Layer Wrapping. |
| Width |
Specifies the width of the wall. |
| Function |
Specifies the function of the wall, which identifies specific properties: Interior, Exterior, Foundation, Retaining, Soffit, or Core-shaft. See About Wall Function. |
| Additional Top/Exterior Offset |
Specifies an additional offset from the top/exterior rebar cover. This allows placing multiple rebar elements together in different area reinforcement layers. See Rebar Cover Element Properties.
|
| Additional Bottom/Interior Offset |
Specifies an additional offset from the bottom/interior rebar cover. This allows placing multiple rebar elements together in different area reinforcement layers. See Rebar Cover Element Properties.
|
| Additional Offset |
Specifies an additional offset from the rebar cover. This allows placing multiple rebar elements together in different path reinforcement layers. See Rebar Cover Element Properties.
|
|
Graphics
|
| Coarse Scale Fill Pattern |
Specifies a fill pattern for a wall in a coarse-scale view. See View Properties. |
| Coarse Scale Fill Color |
Specifies a color for the fill pattern for a wall in a coarse-scale view. |
|
Materials and Finishes
|
| Structural Material |
Specifies a material for the structure of the element. This information can be included in schedules. Click the value box to open the Material Browser. See Materials. |
|
Identity Data
|
| Keynote |
Specifies or modifies the structural wall keynote. Click in the value box to open the Keynotes dialog. See Keynotes. |
| Model |
The manufacturer internal number. |
| Manufacturer |
The wall manufacturer. |
| Type Comments |
A field for entering general comments about the wall type. This information can be included in a schedule. |
| URL |
A link to a web page that may contain type-specific information. |
| Description |
A description of the wall. |
| Assembly Description |
A description of the assembly based on the assembly code selection. This is a read-only value. |
| Assembly Code |
A Uniformat assembly code selected from a hierarchical list. |
| Type Mark |
A value that designates the particular wall. This value must be unique for each element in a project. Revit warns you when the number is already used, but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages. |
| Fire Rating |
The fire rating of the wall. |
| Cost |
The pricing of the wall. |