Commands supported:
- /TITLE [export only]
- N (node)
- EN (element)
- E (element, with no id)
- EMORE (element continuation)
- NBLOCK (node block)
- EBLOCK (element block)
- ET (element type definition)
- TYPE (element type selector)
- MP (material property)
- R (element property value)
- REAL (element property selector)
- F (nodal load)
- SFE (surface load)
- D (boundary condition)
The exact element types which are supported are:
- Handled as trusses:
- LINK1
- LINK8
- PIPE16
- PIPE20
- LINK31
- LINK32
- LINK33
- LINK34
- PIPE59
- LINK68
- Handled as beams:
- Handled as nonlinear beams:
- Handled as membranes:
- Handled as plates:
- Handled as nonlinear shells:
- Handled as sandwich (thick composites):
- Handled as thin composites:
- Handled as basic bricks:
- SOLID5
- SOLID45
- HYPER58
- SOLID64
- SOLID65
- SOLID73
- HYPER86
- VISCO107
- Handled as enhanced bricks:
- Handled as heat transfer bricks:
- Handled as electrostatic bricks:
- Handled as electrostatic tetrahedra:
- Handled as electrostatic 2D
- Handled as tetrahedra:
- Handled as heat transfer tetrahedra:
- Handled as 2D:
- Handled as nonlinear 2D:
- PLANE2
- SURF22
- PLANE53
- PLANE55
- HYPER56
- HYPER74
- PLANE77
- PLANE78
- PLANE82
- PLANE83
- PLANE84
- VISCO88
- VISCO106
- VISCO108
- Handled as gap/cable:
- Handled as nonlinear general contact:
- COMBIN7
- CONTAC12
- CONTAC26
- COMBIN37
- COMBIN39
- COMBIN40
- CONTAC52
- Handled as nonlinear dashpot:
- Handled as 2D fluid flow:
- FLUID15
- FLUID29
- FLUID79
- FLUID81
- Handled as 3D fluid flow:
- Handled as 2D heat transfer:
- Handled as stiffness matrix: