- This tutorial uses the model created in the Truss Tower Model tutorial. If this tutorial was not completed, use Truss Tower.ach in your tutorial models folder.
- The vertical and horizontal trusses (Part 1) have a cross-sectional area of 2.79 in
2
.
- The diagonal cross member trusses (Part 2) have a cross-sectional area of 1.67 in
2
.
- All the trusses have a mass density of 7.3395E-4 lbf s
2
/in/in
3
and a modulus of elasticity of 30E6 psi.
- The four nodes at the bottom of the tower are fixed.
Next