- This tutorial uses the results from the model created in the Circuit Board Steady-State Heat Transfer Analysis tutorial. If this tutorial was not completed use Circuit Board Results.ach in your tutorial models folder.
- Start with the temperature profile from the steady-state heat transfer analysis.
- The internal heat generation linearly decreases to 0 over 60 seconds.
- After the internal heat generation reaches 0, continue the analysis for another 240 seconds.
- The convection loads remain constant at the original values throughout the analysis.
- The board and slots have a specific heat of 92.35 Btu/(lbf·s
2
/in·°F) and a mass density of 1.29x10
-3
lbf·s
2
/in/in
3
.
Next