Intersect the Vertical Part

For the mesh to match where the vertical and horizontal parts meet, the long vertical line must be split into three lines.  We will use the Intersect command to do this. Refer to the following image for guidance.

1. Click  Draw Modify Intersect.
   • Click the top horizontal line of the horizontal part (A) and press Enter. This is the cutting line. 
   • Click the right vertical line of the vertical part (B) – this is the line to be cut by the previously selected line – and press Enter.
2. Click Draw Modify Intersect.
   • Click the bottom horizontal line of the horizontal part (C) and press Enter.
   • Click the lower part of the right vertical line of the vertical part (D) and press Enter.

Next

Parent topic: 2-D Weldment Model