- This tutorial uses the model created in the Crank CAD Model tutorial. If this tutorial was not completed, use Meshed Crank.ach, in your tutorial models folder.
- The beam elements have a round cross-section of 1 inch radius.
- The knob, arm and beam elements are made of Aluminum 6061-T6; 6061-T651.
- The shaft is made of Steel (ASTM-A36)
- The model is fully constrained at the end of the shaft.
- A 75 lbf load is applied to the top surface of the knob.
- A moment of 200 lbf-in is applied to the top surface of the knob.
Next