Create a New Design Scenario

This scenario preserves the natural frequency (modal) analysis setup and results.

1. If you are continuing from a prior Truss Tower analysis and are still in the Results environment, click the FEA Editor tab at the top of the browser (tree view).
2. Right-click the Analysis Type heading in the browser and select Set Current Analysis Type Linear Response Spectrum.
   Note: You can also change the analysis type using the options under Analysis Change Type on the command ribbon.
3. Click Yes to create a new design scenario for the new analysis type, rather than changing the analysis type for the existing scenario.  

Next

Parent topic: Truss Tower Response Spectrum Analysis