已出版的会议文献

已出版的会议文献清单。

• Hadinata, C., R. Zheng, C. Friedl, P.K. Kennedy, P. Zhu, and G. Edward. 2007. Material Characterization for Injection Molding Simulation. Proc. 23nd Annual Conference of the Polymer Processing Society, Salvador, Brazil : 28-11.
• Kennedy, P.K., R.G. Speight, C. Friedl and F. Costa. 2007. Best Practice for Bench-marking Injection Molding Simulation, Polymer Process Engineering 07, Bradford: 299-321.
• Thomas, A.R., R.G. Speight and M. Annareddy. 2007. Using Injection Molding Simulation to Develop Environmentally Friendly Products, Polymer Process Engineering 07, Bradford : 474-492.
• Zheng, R., and P. K. Kennedy. 2006. Impact of Flow on Crystallization and Impact of Crystallization on Flow in Injection Molding. 2006 Academic Workshop on Advanced Forming Technology and Materials Processing, Shanghai: 222-230.
• Costa, F. S., H. Yokoi, Y. Murata, and P. K. Kennedy. 2006. Numerical Simulation of Ear-flow: The Faster Advance of the Flow Front at the Edge of a Cavity. Proc. 22nd Annual Conference of the Polymer Processing Society, Japan.
• Jin, X. 2006. Modeling of Short Fiber Composite Strength. Proc. 22nd Annual Conference of the Polymer Processing Society, Japan.
• Han, S., and X. Jin. 2006. The Numerical Analysis of Injection-Compression Molding of Thermosets, Proc. 22nd Annual Conference of the Polymer Processing Society, Japan.
• Zheng, R., and P. K. Kennedy. 2006. Anisotropic Thermal Conduction in Injection Molding, Proc. 22nd Annual Conference of the Polymer Processing Society. Japan.
• Fan, Z., C. Kietzmann, S. Ray, F. Costa, and P. Kennedy. 2005. Three Dimensional Cooling and Warpage Simulation for the Injection Over-Molding Process, SPE ANTEC Proceedings, Boston: 568-572.
• Cook, P., H. Yu, C. Kietzmann, and F. Costa. 2005. Prediction of Flow Imbalance in Geometrically Balanced Feed Systems, SPE ANTEC Proceedings, Boston: 526-530.
• Lin, B., P. Brincat, Z. Yuan, and X. Jin. 2005. Interfacing Process Setting Data Between Analysis and Machine Control, SPE ANTEC Proceedings, Boston: 2227- 2231.
• Ray, S. R., F. S. Costa, and P. K. Kennedy. 2005. Three-Dimensional Simulation of Gas-Assisted Injection Molding, SPE ANTEC Proceedings, Boston: 451-455.
• Farrington, P., and R. Speight. 2005. Geometry Dependent Flow Properties of Long Glass Fiber Reinforced Polypropylene, SPE ANTEC Proceedings, Boston: 764-768.
• Bakharev, A., R. Zheng, Z. Fan, F. S. Costa, X. Jin, and P. K. Kennedy. 2005. Corner Effect in Warpage Simulation, SPE ANTEC Proceedings, Boston: 511-515.
• Han, S., F. Costa, and S. Ray. 2004. Integrated Flow Analysis During Filling and Post-Filling Stage of Thermoset Molding, Proceedings of NUMIFORM 2004, Ohio, Jun 13-17: 180-185.
• Zheng , R. and P.K. Kennedy, 2004. Flow-induced Orientation in Shear Flow and Injection Molding of Semicrystalline Polymer, Proceedings of Material Processing for Properties and Performance, Singapore, November 24-26: 876-885.
• Lin, B., X. Jin, R. Zheng, F. Costa, and Z. Fan. 2004. 3D Fiber Orientation Simulation for Plastic Injection Molding, Proceedings of NUMIFORM 2004, Ohio, Jun 13-17: 282-287.
• Shoemaker, J., K. Hayden, P. Englemann, and P. Miller. 2004. Designing the Cooling System: What's the Relationship between Mold Material Selection, Water Line Spacing and Mold Surface Temperature Variation, SPE ANTEC Proceedings, Chicago: 823-827.
• Han, S., F. Costa, S. Ray, and S. Willmorth. 2004. Three-Dimensional Dynamic Simulation of Paddle Shift During Semiconductor-Chip Encapsulation, SPE ANTEC Proceedings, Chicago: 1684-1688.
• Bakharev, A., Z. Fan, F. Costa, S. Han, X. Jin, and Peter Kennedy. 2004. Prediction of Core Shift Effects Using Mold Filling Simulation, SPE ANTEC Proceedings, Chicago: 621-625.
• Yu, H., C. Kietzmann, P. Cook, S. Xu, F. Costa, and P. K. Kennedy. 2004. A New Method for Simulation of Injection Molding, SPE ANTEC Proceedings, Chicago: 641-644.
• Brincat, P., R. Speight, A. Bakharev, and P. K. Kennedy. 2004. Use of In-Line Viscosity Control Method to Stabilise Part Quality During Regrind Variation, SPE ANTEC Proceedings, Chicago: 609-613.
• Fan, Z., B. Lin, F. Costa, X. Jin, R. Zheng, and P. K. Kennedy. 2004. Three Dimensional Warpage Simulation for Injection Molding, SPE ANTEC Proceedings, Chicago: 491-495.
• Kennedy, P. K.,and R. Zheng. 2003. Crystallization and Simulation of Injection Molding, Polymer Crystallization and Structure Formation in Processing, Johannes Kepler University, Linz, Austria, Sep 19-20.
• Costa, F. S., S. R. Ray, S. Han, B. Lin, and Z. Fan. 2003. Advances in Three Dimensional Simulation Technology For Injection Molding, Proc 8th Japan International SAMPE Symposium: 605-608.
• Hayden, K., P. Engelmann, J. Shoemaker, and M. Monfore. 2003. Keeping it straight: The Five Sided Box, SPE ANTEC Proceedings: 910-914.
• Jaworski, M., and Z. Yuan. 2003. Theoretical and Experimental Comparison of the Four Major Mesh Types Currently Used in CAE Injection Molding Simulation Software, SPE ANTEC Proceedings: 642-646
• Farrington, P., R. Speight, and A. Bakharev. 2003. The Role of Plastication in the Rheology of Injection Molded Thermoplastics. Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
• Bakharev, A. S., and R. G. Speight. 2003. Automatic Melt Preparation Setup for Reciprocating Screw Injection Molding Machines, Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
• Zheng, R., and P. Kennedy. 2003. Modeling Flow-induced Crystallization. Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
• Kennedy, P., and R. Zheng. 2003. Prediction of Flow-induced Crystallization in Injection Molding. Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
• Han, S., R. Zheng, P. Kennedy, J. Xu, and L. Kishbaugh. 2003. Numerical analysis of microcellular injection molding, SPE ANTEC Proceedings: 696-700.
• Han, S., F. Costa , and S. Ray. 2003. Three-Dimensional Simulation of Wire Sweep During Semiconductor-Chip Encapsulation, SPE ANTEC Proceedings:1310-1314.
• Ray, S., and F. Costa. 2003. Flow prediction in the presence of inserts for the injection over-molding process, SPE ANTEC Proceedings: 632-636.
• Astbury, D., A. Bakharev, and R. Speight. 2003. Automatic Injection Velocity Initialization for Computer-Assisted Injection Molding Setup, SSPE ANTEC Proceedings 576-581.
• Bakharev, A., and R. Speight. 2003. Closed-Loop Process Control Strategies For Thermoplastic Injection Molding, SPE ANTEC Proceedings: 382-387.
• Coates, P. D., L. Mulvaney-Johnson, R. G. Speight, P. Brincat, and A. S. Bakharev. 2003. Setup and Optimisation of The Gas Assisted Injection Moulding Process Using An Expert System, SPE ANTEC Proceedings: 419-424.
• Bakharev, A. S., R. G. Speight, and A. R. Thomas. 2002. Automated Plastication Setup For Injection Molding Machines, SPE ANTEC Proceedings, San Francisco, 2002.
• Bakharev, A. S., R. G. Speight, and P. A. Brincat. 2002. Closed Loop Viscosity Control for Injection Molding, SPE ANTEC Proceedings, San Francisco.
• Kennedy, P., and R. Zheng. 2002. High Accuracy Shrinkage and Warpage Prediction for Injection Molding, SPE ANTEC Proceedings, San Francisco.
• Zheng, R., P. Kennedy, X. Yu, and L. Kishbaugh. 2002. Simulation of the MuCell® Process in Injection Molding, SPE ANTEC Proceedings, San Francisco.
• Han, S., F. Costa, P. Cook, and S. Ray. 2002. Three-Dimensional Simulation of Thermoset Injection Molding Applied To Semiconductor-Chip Encapsulation, SPE ANTEC Proceedings, San Francisco.
• Sherbelis, G., and R. Speight. 2001. On-Line Viscosity Control for the Injection Molding Process, SPE ANTEC Proceedings, Dallas: 433-439.
• Costa, F. S., S. Ray, C. Friedl, P. S. Cook, and S. Xu. 2001. The Effect of Inertia on Fill Pattern in Injection Molding, SPE ANTEC Proceedings, Dallas: 454-459.
• Speight, R. G., L. Reisinger, C. Lee, and M. Spence. 2001. Automated Injection Molding Machine Optimization, SPE ANTEC Proceedings, Dallas: 553-559.
• Zhao, Z., and X. Jin. 2001. Property Separation Based on Inversion of Micro-Mechanics, SPE ANTEC Proceedings, Dallas: 560-562.
• Trahan, J. S., K. Hayden, P. Engelmann, and J. Shoemaker. 2001. Understanding the Source of Reduced Mechanical Properties in Reinforced Molded Products, SPE ANTEC Proceedings, Dallas: 709-713.
• Zheng, R., and P. Kennedy. 2001. Numerical Simulation of Crystallization in Injection Molding. CD-ROM Proceedings of 6th World Congress of Chemical Engineering, September 23-27, in Melbourne, Australia.
• Lin, B., W. G. Ryim. 2000. Gate Location Optimization in Injection Molding Processing. Paper presented at CAE and Related Innovations for Polymer Processing, in Orlando, Florida.
• Jin. X. 2000. Runner System Design Optimization for Multigated and Multicavity Injection Molds. Paper presented at CAE and Related Innovations for Polymer Processing, in Orlando, Florida.
• Speight, R. 2000. Injection Molding Process Control, SPE ANTEC Proceedings, Vol. III: 3853-3857.
• Wang, T. J., and C. K. Yoon. 2000. Shrinkage and Warpage Analysis of Injection-Molded Parts. SPE ANTEC Proceedings, Vol. I: 687-692.
• Turng, L. S., J. Lottey, M. Mahishi, N. Yildirim. N. Mandar, and B. Gupta. 2000. Application of Internet and Web Technologies for Management of Molding Know How. SPE ANTEC Proceedings, Vol. I: 596-600.
• Barton, K. S., B, Lin, and W. G. Ryim. 2000. Automatic Design Optimization Molding Simulation for Injection Molded Parts, SPE ANTEC Proceedings, Vol. III: 3006-3010.
• Duff, A. L. 2000. Increased Speed to Market Using CAE Simulation for Injection Molded Parts, SPE ANTEC Proceedings, Vol. III:3002-3005.
• Wang, T. J., S. C. Chen, and H. H. Chiang. 2000. Applications of Gas-Assisted Injection Molding and Injection/Compression Molding in Thinwall Molding, SPE ANTEC Proceedings, Vol. I: 569-574.
• Thomas, A. R., and P. Kennedy. 2000. Linking Design to Analysis: The Future of Simulation for Injection Molding, SPE ANTEC Proceedings, Vol. III:2982-2988.
• Fan, Z., R. Zheng, P. Kennedy, H. Yu, and A. Bakharev. 2000. Warpage Analysis of Solid Geometry, SPE ANTEC Proceedings, Vol. I: 723-726.
• Zheng, R., P. Kennedy, X-J. Fan, N. Phan-Thien, and R. I. Tanner. 2000. Brownian Dynamics Simulation of Non-Dilute Fibre Suspension Flows in a Centre-Gated Disk, SPE ANTEC Proceedings, Vol. I: 671-674.
• Kennedy, P., and R. Zheng. 1999. The Effect of Injection Molding on the Mechanical Properties of Short Fiber Reinforced Thermoplastics, Institute of Materials Engineering Australia, Melbourne, December 1999.
• Kennedy, P. 1999. Linking Design to Analysis: New Trends in Simulation for Injection Molding. Nanyang Technological University, School of Mechanical and Production Engineering Industry Symposium '99, Singapore.
• Rewal, N., D. Toncich, and C. Friedl. 1999. Predicting Part Weight in Injection Moulding Using Nozzle Based Measurements. Paper presented at the Fifteenth Annual Polymer Processing Society Meeting, June 1–4, in s-Hertogenbosch, The Netherlands.
• Bakharev, A., and D. Astbury. 1998. Asymmetrical Simulation of Filling and Packing Stages of Injection Molding Process. SPE ANTEC Proceedings, Vol. III: 594-598.
• Talwar, K., F. Costa, V. Rajupalem, L. Antanovski, and C. Friedl. 1998. Three Dimensional Simulation of Plastic Injection Molding. SPE ANTEC Proceedings, Vol. III: 562-566.
• Brincat, P., C. Friedl, and K. Talwar. 1998. Extensional Viscosity Modelling for Injection Molding Simulation, SPE ANTEC Proceedings, Vol. III: 552-556.
• Speight, R. G., A. J. Munro, and A. Khassapov. 1998. Benefits of Velocity Phase Profiles for Injection Molding. SPE ANTEC Proceedings, Vol. I:520-524.
• Shoemaker, J., C. Kietzmann, P. Engelmann, and E. Dawkins. 1998. Cooling Prediction on Non-Watered Copper and Steel Mold Cores. SPE ANTEC Proceedings, Vol. I: 841-845.
• Hu, W., N. Singh, D. Thevalingam, and C. Friedl. 1998. Application of Case-Based Technology in Mould Design System, SPE ANTEC Proceedings, Vol. I: 864-868.
• Talwar, K., F. Costa, V. Rajupalem, L. Antanovski, C. Friedl, and P. Kennedy. 1998. Three Dimensional Simulation of Plastic Injection Molding, Molding '98, Executive Conference Management, Michigan.
• Zhao, J. , D. Thevalingam., and C. Friedl. 1998. Classification system for feature based injection moulded plastic parts. Pacific Conference in Manufacturing Engineering, Brisbane, Australia.
• Rajupalem, V., K. Talwar, and C. Friedl. 1997. Three-Dimensional Simulation of the Injection Molding Process, SPE ANTEC Proceedings, Vol.I: 670-673.
• Kennedy, P., and H.Yu. 1997. Plastic CAE Analysis of Solid Geometry,SPE ANTEC Proceedings, Vol.I: 666-669.
• Rowland, J. C., and D. O. Kazmer. 1997. Quantifying the Economic Value Added of On-Line Quality Control Systems, SPE ANTEC Proceedings, Vol.I: 399-404.
• Speight, R. G., and J. D. Hull. 1997. Pressure Measurements for Injection Molding Control, SPE ANTEC Proceedings, Vol.I: 561-
• Speight, R. G., P. D'Agostino, and J. S. Herrmann. 1997. Melt and Mould Temperature Measurements for Polymer Injection Molding, SPE ANTEC Proceedings, Vol.I: 568-572.
• Sherbelis, G., E. Garvey, and D. Kazmer. 1997. The Methods and Benefits of Establishing a Process Window, SPE ANTEC Proceedings, Vol.I: 545-550.
• Sherbelis, G., and J. Barnes. 1997. Bringing CAE to Production, SPE ANTEC Proceedings, Vol.I: 662-665.
• Nebauer, W., and A. Carpenter. 1997. The Importance of Pressure Dependent Viscosity in Injection Molding Shrinkage Simulation Software -- A Verification Study,SPE ANTEC Proceedings, Vol.I: 1047-1053.
• Ray, S., K. Talwar, C. Friedl, W. Thompson. 1997. Incorporation of Viscoelastic Constitutive Equations in the Injection Moulding Process. Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 249-258.
• Brincat, P., C. Friedl, K. Talwar, and W. Thompson. 1997. Contraction Pressure Losses in the Injection Moulding of Polymers.Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 239-248.
• Rewal, N., D. Toncich, and G. Sherbelis. 1997. Intelligent Quality Control Strategies for Injection Moulding.Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 661-670.
• Song, W. Q., S. Masood, W. Thompson, C. Friedl, and D. Liming. 1997. Investigation on Metal-Polymer Composites for Fused Deposition Modelling. Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 465-471.
• Zhang, C. Y., J. Leonard, and R. G. Speight. 1996. Adaptive Controller Performance Used for Ram Velocity Control During Filling Phase, SPE ANTEC Proceedings, Vol.I: 593-597.
• Speight, R. G., J. B. Hull, and P. D. Coates. 1996. Control of Polymer Melt Flow Front Position During the Injection Molding Process, SPE ANTEC Proceedings, Vol.I: 588-592.
• Speight, R. G., E. P. Yazbak, and P. D. Coates. 1996. In-line Process Measurement for Integrated Injection Molding, SPE ANTEC Proceedings, Vol.I: 508-512.
• Friedl, C. 1996. Progress Towards True 3D CAE Analysis for Injection Molding, SPE ANTEC Proceedings, Vol.I:731–735.
• Sherbelis, G., and C. Friedl. 1996. The Importance of Pressure Dependent Viscosity and Contraction Pressure Losses in Injection Molding CAE Analysis, SPE ANTEC Proceedings, Vol.I: 778–782.
• Bakharev, A. S., and C. L. Tucker. 1996. Predicting The Effect of Preforming on RTM Mould Filling, SPE ANTEC Proceedings, Vol.I: 797–801.
• Rowland, J., and D. Kazmer. 1996. An On-line Quality Monitoring System for Thermoplastic Injection Molding, SPE ANTEC Proceedings, Vol.I: 513–518.
• Zheng, R., N. McCaffrey, K. Winch, H. Yu, and P. Kennedy. 1995. Predicting Warpage of Injection Molded Fiber-Reinforced Plastics, SPE ANTEC Proceedings, Vol.I: 111-111.
• Nebauer. W. 1995.Comparison of Shrinkage Measurements and Computer Software Predictions for an Automotive Fascia Component, SPE ANTEC Proceedings, Vol.I: 923–925.
• Costa, F., C. Friedl, and W. Thompson. 1995. An Adaptation of the Boundary Element Method for Modeling Gas Injection Molding, in Simulation of Materials Processing: Theory, Methods and Applications, S. F. Shen and P. R. Dawson (Eds.), Proc of Numiform 95, Ithaca, New York: .