Profile view band styles control the location and content of data boxes.
Use the Toolspace Settings tab to create and edit profile view band styles. Use the Profile View Properties dialog box to specify which data box styles to use and where to place them on the profile view.
Data box labels are label objects that can be manipulated like other AutoCAD Civil 3D label objects.
The types of data box styles that you can create:
|
This type of data box style... |
Provides this type of annotation... |
|---|---|
|
Profile Data |
Chainages, level of one or two profiles at each chainage, and level difference between two profiles at the chainage Note: The individual geometry points to label can be specified with the Profile Data band type.
|
|
Vertical Geometry |
Geometric details of vertical straights and curves |
|
Horizontal Geometry |
Geometric details of horizontal straights, curves, and transitions |
|
Superelevation |
Critical transition chainages and transition diagrams for the superelevation at curves |
| Long Section | Sampled chainage, material, typical section details, incremental distance and volume, balanced volume information |
| Pipe Data | Location and key dimensions of pipe network parts, offset, level, direction |
When you need a new data box style, it is usually easiest to find an existing style that is similar to what you need, then copy it and make the required changes. You can also create one and change whatever default values are not suitable.
The notes in this section describe what is unique to profile data boxes.
