Use this tab to view structural data about a profile.
- Name
-
Specifies the name of the profile.
- Description
-
Specifies an optional description for the profile.
- Type
-
Specifies whether the profile is a surface profile
, layout profile 
, superimposed profile, or corridor profile 
. - Data Source
-
For surface profile, displays the name of the surface represented in the profile. For superimposed profiles, displays the name of the superimposed profile. For corridor profiles, specifies the name of the source corridor. Not used for layout profiles or corner radius profiles.
- Offset
-
Specifies the offset distance from the centerline of the parent horizontal alignment: either 0 for a centerline profile, a positive number for a right offset, a negative number for a left offset. This value is set to 0 for corner radius profiles.
- Update Mode
-
For surface profiles only. Specifies whether the profile updates automatically to reflect changes in surface level.
- Dynamic: The profile automatically updates to reflect changes in the surface level or the geometry of the parent horizontal alignment.
- Static: The profile shows surface levels at the time of its creation. It does not update to reflect changes that occur later.
- Layer
-
Specifies the drawing layer on which the profile is placed.
- Style
-
Specifies the style used by the profile.
- Chainage Start/End
-
Specifies the first and last chainage numbers for the profile. The chainage numbers represent distances along the parent horizontal alignment.
- Level Minimum/Maximum
-
Specifies the highest and lowest level values that occur along the profile.
- Alignment
-
Specifies the parent horizontal alignment for the profile.
Parent Horizontal Alignment
- Name
-
Specifies the name of the horizontal alignment associated with this profile.
- Chaining
-
Specifies the start and end chainage values for the horizontal alignment.