Meet the requirements for working with Moldflow and Abaqus models.
Before importing Moldflow and Abaqus models, ensure the following requirements are met.
| Moldflow | Abaqus | ||
|---|---|---|---|
| Supported Versions | Insight 2014, 2015 | Abaqus 6.12, 6.13, 6.14 | |
| Mesh Type | 3D elements | C3D4, C3D8, C3D8R, C3D10, C3D10M, S3, S4, S4R | |
| Geometry | Single parts | Single parts* | |
| Must Contain | Fill + Pack analysis sequence | Load and boundary conditions |
* The Abaqus model may contain an assembly with multiple parts, but you will be prompted to select a single part to use for mapping.
Advanced Material Exchange is operable using Windows 7 and 8, with a 64 bit processor, and is currently available in English, German, and Japanese.