Specifies the angle vertex for the three-point angular dimension.
Supported platforms: Windows only
VBA:
object.AngleVertex
Type: Dim3PointAngular
The object this property applies to.
Read-only: No
Type: Variant (three-element array of doubles)
A 3D coordinate representing the angle vertex.
No additional remarks.
VBA:
Sub Example_AngleVertex() ' This example creates a Dim3PointAngular object in model space ' and then alters its angle vertex Dim DimPointAngularObj As AcadDim3PointAngular Dim AngleVertex(0 To 2) As Double, NewAngleVertex(0 To 2) As Double Dim FirstPoint(0 To 2) As Double, SecondPoint(0 To 2) As Double Dim TextPoint(0 To 2) As Double Dim CurrentVertex As Variant ' Define the new Dim3PointAngular object AngleVertex(0) = 0: AngleVertex(1) = 0: AngleVertex(2) = 0 NewAngleVertex(0) = 1: NewAngleVertex(1) = 1: NewAngleVertex(2) = 0 FirstPoint(0) = 2: FirstPoint(1) = 2: FirstPoint(2) = 0 SecondPoint(0) = 1: SecondPoint(1) = 4: SecondPoint(2) = 0 TextPoint(0) = 6: TextPoint(1) = 6: TextPoint(2) = 0 ' Create the new Dim3PointAngular object in model space Set DimPointAngularObj = ThisDrawing.ModelSpace.AddDim3PointAngular(AngleVertex, FirstPoint, SecondPoint, TextPoint) ThisDrawing.Application.ZoomAll ' Display current vertex CurrentVertex = DimPointAngularObj.AngleVertex MsgBox "The angle vertex of the new object is set to:" & vbCrLf & _ CurrentVertex(0) & vbCrLf & _ CurrentVertex(1) & vbCrLf & _ CurrentVertex(2) ' Alter vertex setting for this object DimPointAngularObj.AngleVertex = NewAngleVertex ThisDrawing.Regen acAllViewports ' Display new vertex settings CurrentVertex = DimPointAngularObj.AngleVertex MsgBox "The angle vertex of the object has been reset to:" & vbCrLf & _ CurrentVertex(0) & vbCrLf & _ CurrentVertex(1) & vbCrLf & _ CurrentVertex(2) End Sub
Visual LISP:
(vl-load-com) (defun c:Example_AngleVertex() ;; This example creates a Dim3PointAngular object in model space ;; and then alters its angle vertex (setq acadObj (vlax-get-acad-object)) (setq doc (vla-get-ActiveDocument acadObj)) ;; Define the new Dim3PointAngular object (setq AngleVertex (vlax-3d-point 2 5 0) NewAngleVertex (vlax-3d-point 1 1 0) FirstPoint (vlax-3d-point 2 2 0) SecondPoint (vlax-3d-point 1 4 0) TextPoint (vlax-3d-point 6 6 0)) ;; Create the new Dim3PointAngular object in model space (setq modelSpace (vla-get-ModelSpace doc)) (setq DimPointAngularObj (vla-AddDim3PointAngular modelSpace AngleVertex FirstPoint SecondPoint TextPoint)) (vla-ZoomAll acadObj) ;; Display current vertex (setq CurrentVertex (vla-get-AngleVertex DimPointAngularObj)) (alert (strcat "The angle vertex of the new object is set to:\n" (rtos (vlax-safearray-get-element (vlax-variant-value CurrentVertex) 0) 2) "\n" (rtos (vlax-safearray-get-element (vlax-variant-value CurrentVertex) 1) 2) "\n" (rtos (vlax-safearray-get-element (vlax-variant-value CurrentVertex) 2) 2))) ;; Alter vertex setting for this object (vla-put-AngleVertex DimPointAngularObj NewAngleVertex) (vla-Regen doc acAllViewports) ;; Display new vertex settings (setq CurrentVertex (vla-get-AngleVertex DimPointAngularObj)) (alert (strcat "The angle vertex of the object has been reset to:\n" (rtos (vlax-safearray-get-element (vlax-variant-value CurrentVertex) 0) 2) "\n" (rtos (vlax-safearray-get-element (vlax-variant-value CurrentVertex) 1) 2) "\n" (rtos (vlax-safearray-get-element (vlax-variant-value CurrentVertex) 2) 2))) )