Controls the display behavior and display limits of the grid.
| Type: | Bitcode |
| Saved in: | Drawing |
| Initial value: | 2 |
The setting is stored as a bitcode using the sum of the following values:
|
0 |
Restricts the grid to the area specified by the LIMITS command |
|
1 |
Does not restrict the grid to the area specified by the LIMITS command |
|
2 |
Turns on adaptive grid display, which limits the density of the grid when zoomed out |
|
4 |
If the grid is set to adaptive display and when zoomed in, generates additional, more closely spaced grid lines in the same proportion as the intervals of the major grid lines |
|
8 |
Changes the grid plane to follow the XY plane of the dynamic UCS. (Not applicable to AutoCAD LT.) |