Bevels the edges of 3D solids and surfaces.
You can select more than one edge at a time, as long as they belong to the same face. Enter a value for the chamfer distance or click and drag the chamfer grips.
Selects a single solid or surface edge to chamfer.
Sets the distance of the first chamfer edge from the selected edge. The default value is 1.
Sets the distance of the second chamfer edge from the selected edge. The default value is 1.
Chamfers all edges on a single face. For any edge, there are two possible loops. After selecting a loop edge you are prompted to Accept the current selection or choose the Next loop.
Controls the chamfer distance with a mathematical expression. See Control Geometry with the Parameters Manager for a list of operators and functions allowed.