This report extracts the component wire connection data and shows it in a dialog box.
Find
Command entry:
AESCHEMATICREPORT
Select Component Wire List from the report list.
Specify whether to process the project, active drawing, or select components.
Each entry shows a connection to a component, the wire number, component tag name, terminal pin number, component location code (if present), and the layer that the connected wire is on.
Options
Specifies to include stand-alone terminals or plug-jack connectors in the report.
Installation Codes to Extract
Extracts only the information for components with specific installation values. Indicate to process all components that carry part number values, components without an installation code, or only components marked with a location code that matches that entered in the edit box. Wild-cards are supported.
Once you pick Named Installation, type the installation code in the box or click List: Drawing or List: Project to select from a list of used installation codes. You can also create a report from multiple installation codes. AutoCAD Electrical automatically creates a comma-delimited list for the named installation search.
Location Codes to Extract
Extracts only the information for components with specific location values. Indicate to process all components that carry part number values, components without a location code, or only components marked with a location code that matches that entered in the edit box. For example, BOM report for components marked "OP STA 2". Wild-cards are supported.
Once you pick Named Location, type the location code in the box or click List: Drawing or List: Project to select from a list of used location codes. You can also create a report from multiple location codes. AutoCAD Electrical automatically creates a comma-delimited list for the named location search.
List
Lists drawings that appear to be out-of-date with the wire connection table of the project.
Freshen Wire Connection Table
Specifies for AutoCAD Electrical to update the wire connection table to include any out-of-date drawing files.
Format
Changes the format of the extracted data. The subdialog box lists the format files to select from.