Mark and Verify Dialog Box

Marks drawings to track changes. Verifies drawings to report changes.

Find

 Command entry:  AEMARKVERIFY

Creates a list of changes made after the drawings are marked. The report includes added, changed, copied, and deleted components or wire numbers. Detects changes made using AutoCAD, AutoCAD LT, or AutoCAD Electrical.

This tool places invisible data on each component to track additions and modifications. Information is written to the project database file to check for deleted components. Your drawings must be named and part of the active project to use this command.

Note: This command writes information to the project database file that is used to check for deleted components. Your drawings must be named and part of the active project to use this command.

Mark/verify drawing or project	Specifies to mark or verify the active drawing or process all drawings in the current project.
Mark	Places invisible information on all AutoCAD Electrical components including blocks not created in AutoCAD Electrical, lines, and wires.
Verify	Generates a list of changes since the drawings were marked.
Remove	Removes all invisible mark data.
Previous	Redisplays the last check mark exception report.
Surf	Continues surfing on exceptions generated the last time the mark/verify command was used.
Current drawing statistics	Displays any mark data found on the drawing.