To Show Sequencing Assignments

Show terminal strip sequencing assignments

1. Enter AESHOWTERMINALSEQ at the command prompt.
2. Select a supplementary terminal strip.

   The leveling assignments for the selected terminal strip display in the command line. You see something like: LEV4-LEV1=001-001-001-001.

3. Press ESC to exit the command.

Show footprint sequencing assignments

1. Enter AESHOWFPSEQUENCE at the command prompt.
2. Select footprint to show the routing path from.
3. Select the device to show the path to.

   The wire connection information for the selected footprints display on the screen.

4. Press ESC to exit the command.