BPARAMETER (Command)

Adds a parameter with grips to a dynamic block definition.

Summary

You can use the BPARAMETER command only in the Block Editor. A parameter defines custom properties for the block reference. After you add a parameter, you must associate an action with the parameter to make the block dynamic.

List of Prompts

The following prompts are displayed.

Alignment

Rotates the block reference about a point to align with other objects in the drawing.

Specify Base Point of Alignment: Specifies the grip about which the block reference will rotate to align with another object in the drawing.
Name: Sets the Name custom property for this parameter.

Base

Defines a changeable base point for the dynamic block reference in relation to the geometry in the block.

Specify Parameter Location: Determines the default location of the basepoint for the block definition. This will be the location of the basepoint grip in the block reference.

Point

Defines custom X and Y properties for the block reference.

Specify Parameter Location

Determines the X and Y location of the point parameter in the block definition. This will be the location of the point grip in the block reference.

Name

Sets the Name custom property for this parameter.

Label

Defines a custom descriptive label for the location of the parameter.

Chain

Determines whether the parameter is included in the selection set of an action that is associated with a different parameter.

Yes. A change to an action associated with this parameter will also trigger other actions associated with this parameter, just as if you had edited the parameter through a grip or custom property.
No. Associated actions are not triggered.

Description

Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties Inspector.

Palette

Specifies whether the Label custom property is displayed in the Properties Inspector when the block reference is selected in a drawing.

Linear

Defines the distance between two key points in the block definition.

Name

Sets the Name custom property for this parameter.

Label

Defines a custom descriptive label for the location of the parameter.

Chain

Determines whether the parameter is included in the selection set of an action that is associated with a different parameter.

Description

Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties palette.

Base

Specifies the Base Location property for the parameter.

Startpoint. The start point of the parameter remains fixed when the endpoint of the parameter is edited in the block reference.
Midpoint. The midpoint of the parameter remains fixed, and the start point and endpoint of the parameter move simultaneously equal distances from the midpoint.

Palette

Specifies whether the Label custom property is displayed in the Properties palette when the block reference is selected in a drawing.

Value Set

Limits the available values for the parameter to the values specified in the set.

List. Specifies a list of available values for the parameter in a block reference.
Increment. Specifies a value increment and minimum and maximum values for the parameter in the block reference.

Polar

Defines a distance and angle for two key points in the block definition.

Specify Base Point: Determines the point in the block definition relative to which the grip will be placed.
Name: Sets the Name custom property for this parameter.
Label: Defines a custom descriptive label for the location of the parameter.
Chain: Determines whether the parameter is included in the selection set of an action that is associated with a different parameter.
Description: Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties palette.
Palette: Specifies whether the Label custom property is displayed in the Properties palette when the block reference is selected in a drawing.
Value Set: Limits the available values for the parameter to the values specified in the set.

XY

Defines an X and Y distance from the base point of a block definition.

Specify Base Point: Determines the maximum X distance for the parameter.
Name: Sets the Name custom property for this parameter.
Label: Defines a custom descriptive label for the location of the parameter.
Chain: Determines whether the parameter is included in the selection set of an action that is associated with a different parameter.
Description: Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties palette.
Palette: Specifies whether the Label custom property is displayed in the Properties palette when the block reference is selected in a drawing.
Value Set: Value Set

Rotation

Defines an angle for the block reference.

Specify Base Point: Determines the point about which the selected block geometry will be rotated.
Name: Sets the Name custom property for this parameter.
Label: Defines a custom descriptive label for the location of the parameter.
Chain: Determines whether the parameter is included in the selection set of an action that is associated with a different parameter.
Description: Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties palette.
Palette: Specifies whether the Label custom property is displayed in the Properties palette when the block reference is selected in a drawing.
Value Set: Value Set

Flip

Mirrors objects or the entire block reference about a reflection line.

Specify Base Point: Determines the first point for the line of reflection. The parameter grip will be displayed at this point.
Name: Sets the Name custom property for this parameter.
Label: Defines a custom descriptive label for the location of the parameter.
Description: Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties palette.
Palette: Specifies whether the Label custom property is displayed in the Properties palette when the block reference is selected in a drawing.

Visibility

Defines objects that will either display or not display within the block definition.

Specify Parameter Location: Determines a location for the parameter grip. The parameter can be placed anywhere within the block definition.
Name: Sets the Name custom property for this parameter.
Label: Defines a custom descriptive label for the location of the parameter.
Description: Defines an extended description of the Label custom property. When the block reference is inserted, this description is displayed at the bottom of the Properties palette.
Palette: Specifies whether the Label custom property is displayed in the Properties palette when the block reference is selected in a drawing.