To Quickly Edit Feature Line Elevations

Use the Quick Elevation Edit command to interactively edit the elevation or grade of any feature line or parcel line in a specified site.

The elevation is displayed at vertices and elevation points, and the grade is displayed along segments. Click to edit the value on the command line.

To quickly edit feature line elevations

1. Click Modify tabEdit Elevations panelQuick Elevation Edit.
   Note: The current site is listed at the command line. If you want to select a different site or an object in the desired site, enter Site. Then, select either an object in the drawing or select Enter to access a list of available sites in the Select Object(s) dialog box.
2. Move your mouse over the geometry you want to edit.
   • Triangles are displayed when you hover over a vertex or intersection point. The elevation is displayed in a tooltip.
   • Circles are displayed when you hover over an elevation point. The elevation is displayed in a tooltip.
   • Arrows are displayed when you hover over a segment. The arrow points to the end of the segment that is closest to the cursor. This is the point that will have its elevation changed with the grade edit. The grade is displayed in a tooltip.
   • Gray glyphs are displayed when you hover over an elevation or grade that cannot be edited. Uneditable lines include objects such as daylight and dynamically linked feature lines.
   When you locate the elevation or grade you want to edit, click your mouse.
3. Do one of the following:
   • Enter the new elevation or grade at the command line.
   • If you clicked an elevation point, you can also enter Surface to open the Select Surface dialog box and select a surface to obtain the elevation from.
     Note: The Surface option only appears if there are surfaces in the drawing.
   • If you clicked a grade point, you can also enter Slope and specify a slope. It edits the elevation at the end of the segment in the direction that the arrow is pointing.

Note: If the feature lines are being used as surface breaklines and the surface Rebuild-Automatic setting is turned on, you can see the surface updating automatically as you make each edit.

To quickly edit feature line elevation points by selecting a reference point

1. Click Modify tabEdit Elevations panelQuick Elevation Edit.
2. Enter Reference.
3. Select the reference point to use. When picking the reference point, it defaults to a point in the site, but you can also select the Pick option to use OSNAP to pick any location in the drawing.
4. Move the cursor around the reference point and a yellow line is drawn on screen from the reference point to the closest point.
5. Do one of the following:
   • Enter a grade. The grade is applied between the reference point and the point on the feature line.
   • Enter Slope and then enter a slope. The slope is applied between the reference point and the point on the feature line.
   • Enter Difference and then enter the elevational difference. The elevational difference is applied between the reference point and the point on the feature line.

   The assigned elevation for the point is displayed at the command line.