The criteria-based design feature provides the ability to verify that your profile design meets the minimum standards required by your local agency.
- Click the profile. Click .
- In the Profile Properties dialog box, click the Design Criteria tab.
Note: To apply design criteria to a profile, there must be at least one design speed applied to the alignment from which the profile was created.
- Select the Use Criteria-Based Design check box.
- Specify the following settings:
-
Use Design Criteria File
Select this check box to associate a design criteria file with the profile. The design criteria file field and the Default Criteria properties become available when you select the check box.
Note: The design criteria file that is applied to the parent alignment is used by default. A separate design criteria file can be applied to the profile.
-
Use Design Check Set
Select this check box to associate a design check set with the profile. The design check set list becomes available when you select the check box. Select a design check set from the list.
- Click OK.
Note: The entire profile design is validated when you click either Apply or OK.