Use this tab to edit properties of the selected section object.
- Description
-
Specifies the optional description of the current section.
- Type
-
Displays the type of data source from which the section data was extracted. Either
, which indicates from an existing TIN surface; 
, which indicates from a corridor; 
, which indicates from a corridor surface; or 
, which indicates from an existing pipe network. - Data Source
-
Displays the name of the data source from which the current section was sampled.
- Update Mode
-
Specifies the type of update mode for the section. Select Dynamic to specify that the section data updates dynamically if the position of the sample line associated with the section changes or the data source geometry changes.
- Layer
-
Specifies the drawing layer that contains the current section associated with the selected sample line group. Click in the Layer column to open the Layer Selection dialog box. Select a layer in the Layers table.
- Style
-
Specifies the name of the style of the section. Click in this column to open the Select Style dialog box. Select a style in the list or use the standard controls to create a new style, copy or edit the current style selection, or pick a style from the drawing.
- Left Offset
-
Displays the left offset value of the current section.
- Right Offset
-
Displays the right offset value of the current section.
- Minimum Elevation
-
Displays the minimum elevation of the section associated with the selected sample line group.
- Maximum Elevation
-
Displays the maximum elevation of the section associated with the selected sample line group.
- Station
-
Displays the station value of the sample line along which the section is sampled.