To Import Superelevation Data

To import a .CSV file

Important: The layout of the columns in the CSV file must match the layout of the columns in the Superelevation Tabular Editor. The layout should be in the following order:
• Superelevation Region
• Station
• Description
• Smoothing Curve Length
• Left Outside Shoulder
• Left Outside Lane
• Left Inside Lane
• Left Inside Shoulder
• Right Outside Shoulder
• Right Outside Lane
• Right Inside Lane
• Right Inside Shoulder
1. Click an alignment in the drawing.
2. Click Alignment tabModify panelSuperelevation drop-downView Tabular Editor.
3. In the Superelevation Tabular Editor, click .
4. In the Superelevation Import dialog box, click .
5. In the Select File To Import dialog box, navigate to the appropriate file. Click Open.
   Note: If there is existing superelevation data, you receive a warning that existing data will be overwritten.
6. Click OK. The Superelevation Tabular Editor is populated with descriptions and values for each region.
7. Click in a cell to make edits.