To Perform Design Checks on Pressure Networks

You can check a pressure network for deflection, diameter, open connections, and radius of curvature.

  1. Specify the validation solution tip settings.
  2. Select the pressure network to analyze. The Pressure Networks contextual ribbon tab is displayed.
  3. On the Analyze panel, click Design Check .
  4. Select the path along the pressure network in plan or profile view that you want to analyze and press Enter.
  5. Specify the design check parameters in the Run Design Check dialog box and click OK.
  6. Note: Warning symbols are placed in the drawing at the locations of the violations. You can hover your cursor over a warning symbol to view a tooltip which describes the violation.