Edit Feature Settings - Grading Dialog Box

Use this dialog box to view and change grading-related settings.

This topic documents settings in all grading-related Edit Settings dialog boxes (drawing-level, feature-level, and command-level).

Drawing-level ambient settings are identified by the drawing icon.
Grading feature settings are listed near the top of this dialog box, after the General property group, and are identified by the grading icon.
Grading command settings are identified by the command icon.

The precision and number format display used by all grading commands and used to display grading values is specified in the drawing ambient settings.

For general information about drawing, feature, and command settings and their interaction, see Working with the Standard Settings Dialog Box Controls.

For information about drawing-level ambient settings, see Ambient Settings Tab (Drawing Settings Dialog Box)

Default Styles

Use these settings to specify the default styles for new feature lines and grading groups.

Feature Line Style: Specifies the default style to apply when creating feature lines. Click in the Value column, and click to select a style in the Feature Line Style dialog box.
Grading Style: Specifies the default style to apply when creating grading. Click in the Value column, and click to select a style in the Grading Style dialog box.
Cut Slope Grading Style: Specifies the default style to apply when creating cut slope grading. Click in the Value column, and click to select a style in the Cut Slope Grading Style dialog box.
Fill Slope Grading Style: Specifies the default style to apply when creating fill slope grading. Click in the Value column, and click to select a style in the Fill Slope Grading Style dialog box.

For information about style selection, see Select Style Dialog Box.

Default Name Format

Use these settings to specify the default name formats for new feature lines and grading groups. Click in the Value column, and click to make changes in the Name Template dialog box.

Feature Line Creation

Note: This property group is displayed (in different forms) when accessing the settings from the CreateFeatureLineFromAlign, CreateFeatureLines, and DrawFeatureLine commands.

Feature Line Creation (CreateFeatureLineFromAlign)

Use these settings to specify the default behavior for creating feature lines from alignments.

Feature Line Name: Specifies whether a name is applied to feature lines when created.
Use Feature Line Style: Specifies whether a style is applied to feature lines when created.
Layer Setting: Specifies what layer is applied to feature lines when created. The default is Use the Layer Setting which is from drawing settings.
Weed Points: Specifies whether to open the Weed Vertices dialog box so you can weed the objects when converting to a feature line. Change this value to True to open the Weed Vertices dialog box.
Create Dynamic Link: Specifies whether to create a dynamic link to the alignment. Change this value to False to prevent dynamic link creation.
Mid-ordinate Distance: Specifies the mid-ordinate distance for tessellating curves into short line segments. The default is 0.100.
Spiral Tesselation Factor: Specifies the factor for tessellating spirals into short line segments. The default is 0.25.

For more information, see Creating Feature Lines from Alignments

Feature Line Creation (CreateFeatureLines)

Use these settings to specify the default behavior for creating feature lines from objects.

Feature Line Name: Specifies whether a name is applied to feature lines when created.
Use Feature Line Style: Specifies whether a style is applied to feature lines when created.
Layer Setting: Specifies what layer is applied to feature lines when created. Use the layer setting (from drawing settings). Use the current layer. Use the selected entity layer.
Erase Existing Entities: Specifies whether creation commands erase selected objects when they are converted to feature lines. By default objects are erased. Change this value to False to have objects remain in the drawing.
Weed Points: Specifies whether to open the Weed Vertices dialog box so you can weed the objects when converting to a feature line. Change this value to True to open the Weed Vertices dialog box.
Assign Elevations: Specifies whether to open the Assign Elevations dialog box.
Elevation Source: Specifies whether to assign elevations from a surface, from selected gradings or to set a fixed elevation.
Include Intermediate Elevation Breaks: Specifies whether to include intermediate elevation breaks when assigning elevations from a surface or grading group.

For more information, see Creating Feature Lines from Objects

Feature Line Creation (DrawFeatureLine)

Use these settings to specify the default behavior for drawing feature lines.

Feature Line Name: Specifies whether a name is applied to feature lines when created.
Use Feature Line Style: Specifies whether a style is applied to feature lines when created.
Layer Setting: Specifies the default layer setting when feature lines are created.

For more information, see Drawing Feature Lines

Grading Creation

Note: This property group is displayed when accessing the settings from the CreateGrading command.

Use this setting to specify the default behavior for creating grading.

Transition Region Length: Specifies the default length for transition regions. Enter a length in the Value column or click and select a distance in the drawing area. Creation commands prompt for the transition length if you select the start point of a grading to be within or near to an existing grading.

For more information, see Creating Grading from a Footprint

Grading Group Creation

Note: This property group is displayed when accessing the settings from the CreateGradingGroup command.

Use these settings to specify the default behavior for creating grading groups.

Grading Surface Creation: Specifies whether a grading group generates an automatic surface by default.
Use Group Name: Specifies whether the automatic surface is named after the grading group by default.
Surface Style: Specifies the default style for the grading group. Click in the Value column, and click to select a style in the Surface Style dialog box.
Surface Tessellation Increment: Specifies the default maximum distance along the feature line to add supplemental surface triangle lines for better definition of the grading group surface. Enter a length in the Value column or click and select a length in the drawing area.
Surface Cone Tessellation Angle: Specifies the default maximum angle between supplemental projection lines on exterior corners. Enter an angle in the Value column or click and select an angle in the drawing area.

Tessellation settings control the placement of breaklines along rounded exterior corners and straight grading segments

For more information, see Creating a New Grading Group

Feature Line Fit Curve

Note: This property group is displayed when accessing the settings from the FitCurveFeature command.

Use these settings to specify the default behavior for creating feature lines along arcs.

Tolerance: Specifies the maximum distance from a PI along the feature to the arc that is to be inserted. When an arc is inserted, it should pass through all the feature line points (between the start and end points). The tolerance specifies how much any one point can be off of the arc that is averaged through all the points.

Fit Curve Tolerance
Minimum Number Of Segments: Specifies the minimum number of segments that must be identified before creating an arc. This setting is ignored when the Points option is used.

For more information, see Converting Tessellated Lines to Arcs

Grading Elevation Editor

Note: This property group is displayed when accessing the settings from the GradingElevEditor command.

Use these settings to specify the default behavior for the Elevation Editor, when editing feature lines.

Raise/Lower Increment: Specifies the default vertical distance used for each increment when the feature lines of a grading are raised or lowered to adjust volumes.
Show Grade Breaks Only: Specifies whether only the feature line start/end points and any grade breaks in between are displayed. This option simplifies the editing process by allowing elevation edits to span multiple points.

For more information, see Editing Feature Lines with the Elevation Editor

Grading Layout Tools

Note: This property group is displayed when accessing the settings from the GradingTools command.

Use these settings to specify the default criteria for grading layout.

Grading Criteria Set: Specifies the default Criteria Set to use when creating grading. Click in the Value column, and click to select a criteria set in the Grading Criteria Set dialog box.
Grading Criteria: Specifies the default Criteria to use when creating grading. Click in the Value column, and click to select criteria in the Grading Criteria dialog box.

For more information, see Creating Grading

Grading Volume Tools

Note: This property group is displayed when accessing the settings from the GradingVolumeTools command.

Use these settings to specify the default criteria for grading volumes.

Raise/Lower Elevation Increment: Specifies the default vertical distance used for each increment when the feature lines of a grading are raised or lowered to adjust volumes. Enter an incremental length in the Value column or click and select a length in the drawing area.
Limit Feature Selection To Current Group: Specifies whether features outside the current grading group can be selected for raising or lowering in the volume calculations.

For more information, see Displaying and Adjusting Surface Volumes

Join Features

Note: This property group is displayed when accessing the settings from the JoinFeatures command.

Use this setting to specify the default tolerance for joining feature lines.

Tolerance: Specifies how close feature lines must be when using the Join command.

Feature Line Weed

Note: This property group is displayed when accessing the settings from the WeedFeatures command.

Use these settings to specify the default for weeding vertices.

Apply Angle Factor: Specifies whether the Angle factor in the Weed Vertices dialog box is selected by default.
Angle Factor: Specifies the default Angle factor. Enter an angle in the Value column or click and select an angle in the drawing area.
Apply Grade Factor: Specifies whether the Grade factor in the Weed Vertices dialog box is selected by default.
Grade Factor: Specifies the default Grade factor. Enter a percentage in the Value column or click and select a percentage in the drawing area.
Apply Length Factor: Specifies whether the Length factor in the Weed Vertices dialog box is selected by default.
Length Factor: Specifies the default Length factor. Enter a length in the Value column or click and select a length in the drawing area.
Close Point Removal: Specifies whether the 3D Distance factor in the Weed Vertices dialog box is selected by default.
Close Point 3D Distance: Specifies the default 3D Distance factor. Enter a distance in the Value column or click and select a distance in the drawing area.

For more information, see Weeding Vertices