Notches one frame member to fit another, using one profile to cut the other.
- Access
-
Ribbon:
Design tab
Frame pane
Notch
- Frame Member
Selects the first frame member. This frame member receives the notch cut. 
Selects the second frame member. This frame member represents the cutting shape. - Frame Member - Apply notch profile
- Cuts the previously authored notch profile on the second frame member into the first frame member. Available when a frame member with a pre-authored notch profile cutting shape is selected as the second frame member.
- Delete existing end treatments
- When selected, deletes existing end treatments from the notch end before the command runs.