Common to both types. It holds the controls for the Boss placement.
- Access
- On the ribbon, click 3D Model tab
Show Panel icon 
. Select Plastic Part panel to display the Plastic Part panel, and then select Boss 
, and click the Shape tab.
- Placement
- Body selector, to select the target body. From Sketch placement requires 2D points on the same sketch.
- Centers
- Selects the points.
- Flip
- Flips the direction. The direction is automatically set as the one to the closest distance with the part bodies along the sketch plane normal axis. You can also flip the direction by dragging the direction preview arrow.
- Offset From Sketch
- Enter a value to start the boss above the sketch plane. Use a negative value to start below the sketch.
On Point placement requires 3D work points or sketch points and one direction.- Centers
- Selects the points.
- Direction
- Defines the boss direction.
- Flip
- Flips the boss to the opposite direction.
- Centers
- Fillet
- Defines the constant fillet radius at the intersection between the boss (and ribs) with the target part body.