Work with corner chamfers in sheet metal

Add chamfers to one or more corners of a sheet metal part.

Create corner chamfer with single distance

1. On the ribbon, click Sheet Metal tab Modify panel Corner Chamfer .
2. Click One Distance.
3. Select the corners to chamfer. You can select only model edges representing corners.
4. Specify a chamfer distance.
5. Click OK.

Create corner chamfer with distance and angle

1. On the ribbon, click Sheet Metal tab Modify panel Corner Chamfer .
2. Select Distance and Angle.
3. Click the sheet metal edge the chamfer is angled from, and then click one or both corners on the sheet metal edge. You can select only sheet metal edges and model edges representing corners.
4. Specify a chamfer distance and angle.
5. Click OK.

Create corner chamfer with two distances

1. On the ribbon, click Sheet Metal tab Modify panel Corner Chamfer .
2. Select Two Distances, and then click the corner to chamfer. You can select only a model edge representing a corner.
3. Enter Distance 1 and Distance 2. Optionally, On the drop-down list of recently entered values, click one.
4. If necessary, click Flip to reverse the distances on the model.
5. Click OK.

Show Me how to create a corner chamfer