Section View dialog box

Creates a full, half, offset, or aligned section view from a specified parent view. You can also use Section view to create a view cutting line for an auxiliary or partial view. A section view is aligned to its parent view.

Note: If you create a sketch in the drawing, it is not possible to make additional views from this sketch.

Access:

Ribbon: Place Views tab Create panel Section

Note: The default setting for sectioning of standard parts is set in the Application Options dialog box. You can override the setting on the Options tab of the Drawing view dialog box.

Tip: Select Section View Preview as Uncut, in the Drawing tab in Application Options, to display the preview of the section view as uncut. This option controls the display of the preview of the model, and when enabled, increases the performance of the previews of section views.

View/Scale Label

Specifies the view label and scale.
View Identifier	Edits the view identifier string.
Scale	Sets the scale of the view, relative to the part. Enter the scale in the box, or click the arrow to select from a list of commonly used scales. You can enter a scale that is not on the list. The new scale appears above a line in the list and is available until you close Autodesk Inventor LT. It is not added to the scale list from the Standard style.
	Displays or hides the view label.
	Edits the view label text in the Format Text dialog box.

Style

Sets the display style for the view. The default display style for a section view is Hidden Line Removed. To change the display style, click a command.
	Sets the display to show hidden lines.
	Sets the display to remove hidden lines.
	Sets the display to a shaded rendering.

Section Depth

Depth Control	Controls the section depth. Select Full to create the section view to all geometry beyond the cutting line. Select Distance to specify a distance of viewing in model units beginning from the cutting line.
Distance	Sets the distance of the section. Note: Set the section depth to zero to revert to the smallest available section depth. This is not a true zero-depth section. The actual value is 0.000012.

Slice

Include Slice

When checked, the Section View is created with the part sliced depending on the Browser attributes.

Method

Specifies the method of projecting the section view when you either sketch a multi-segment section line or select a view sketch containing a multi-segment section line.
Projected	Created projected view from the sketch line. Note: This option is set as default if all segments are exactly 90 degrees.
Aligned	When checked, resulting section view is perpendicular to the line of projection. Body cut lines do not display in the resulting view. Aligned option is not available for a child (dependent) view. Note: This option is only available when Include Slice option is checked.