Upgrade to Autodesk Infrastructure Map Server 2015 from a 2008 or Earlier Release (Windows)

To upgrade from an earlier release of Infrastructure Map Server, the repository must be upgraded using a slightly different procedure:

1. Stop the existing MapGuide Enterprise 2008 Server, if it is running. To do this, open the Services applet. Select "MapGuide Enterprise 2008 Server", and then select Action Stop.
2. Open a DOS window and change to the 2008 RepositoryAdmin directory C:\Program Files\Autodesk\MapGuideEnterprise2008\Server\RepositoryAdmin.
3. In the DOS window, run BackUpOnlineRepositories.bat.
   Note: Make sure that you do not use BackUpOfflineRepositories.bat for this step or the next step will fail.
4. In the DOS window, run RestoreRepositories.bat. Check the output to make sure there are no errors.
5. Install Autodesk Infrastructure Map Server 2015.
6. Stop the newly installed server, if it is running.
7. Delete the "empty" repositories found at C:\Program Files\Autodesk\Autodesk Infrastructure Map Server 2015\Repositories.
8. Copy the MapGuide Enterprise 2008 repositories found at C:\Program Files\Autodesk\MapGuideEnterprise2008\Server\Repositories to C:\Program Files\Autodesk\Autodesk Infrastructure Map Server 2015\Repositories.
9. In the DOS window, change to the RepositoryAdmin directory C:\Program Files\Autodesk\Autodesk Infrastructure Map Server 2015\RepositoryAdmin.
10. In the DOS window, run UpgradeRepositories.bat. Check the output to make sure there are no errors.
11. In the DOS window, run SetupRepositoryIndices.bat. Check the output to make sure there are no errors.
12. Start Autodesk Infrastructure Map Server 2015.