This dialog is used to set either a Local Coordinate System (LCS), or Global Coordinate System (GCS) to translate/rotate the warpage deflection in a negative/positive direction.
| Displacements | Enter a numerical amount of measurement, to translate the warp deflection in a negative/positive direction. |
| Coordinate system | Select either Local Coordinate System or Global Coordinate System to translate/rotate the warpage deflection in a negative/positive direction. Note: Local Coordinate System will only be available if you have previously defined one.
|
| Apply on [drop-down] | Select whether you want the settings above to be applied to the current deflection plot only, all deflection plots for the current study, or all deflection plots for all currently open studies. |
| Apply | Click Apply to make activate on your model the changes you want to exercise. |