Solver message 701350

Message text

** WARNING 701350 ** The aspect ratio of element xxx is very high

Explanation

For most accurate results with the boundary element method used by the Cool analysis, the aspect ratio of elements needs to be less than 16. High aspect ratios cause singularities during the boundary integration and give rise to poor results on these elements.

Resolution

Select Mesh > Mesh Diagnostics > Aspect Ratio Diagnostic and identify the areas of the part with aspect ratios over 16. Reduce the aspect ratios in the model using the Mesh > Mesh Repair Wizard and/or Mesh > Mesh Tools. If necessary, remesh the part with a smaller edge length to reduce the number of high aspect ratio elements that need to be repaired.