To control the coolant in the cooling circuits (channels), you can either specify a coolant pressure, coolant flow rate, or a Reynolds number.
If the flow rate of the coolant is not known, you can use the Reynolds number to define the flow rate.
Note: This topic describes setting coolant control for an existing coolant inlet. You can also set coolant control when setting a new coolant inlet.
Right-click the arrow on the inlet of the cooling circuit you want to adjust and select Properties from the menu that appears. The Coolant inlet dialog appears.
Select the parameters of the coolant.
Note: The Coolant control drop-down list allows you to specify the coolant properties based on coolant pressure, flow rate, or Reynolds number.