** WARNING 700595 ** Inconsistent orientation on mold outer boundary shell element element number. Flipping the orientation of element element number.
The mold outer boundaries should be oriented so that the blue (+) is on the outside of the mold outer boundaries and the red (-) on the inside. In this case the solver has picked up inconsistent orientation between the two numbered elements. This could occur at the mold corners or under cuts in the mold outer boundary. The solver will attempt to correct the incorrect orientation and continue. If the solver does not converge this problem should be addressed.
Orient the outer mold boundaries so that the blue (+) is facing the outside of the mold. If this does not fix the problem delete the outer boundaries and the solver will assume that the part is located in the center of a square mold.