Solver message 702510

Message text

** WARNING 702510 ** 3D Part elements are not matching the 3D Part Insert elements at the Part Insert interfaces. Could affect solver convergence.

Explanation

Ideally the faces of adjacent part tetrahedron and insert tetrahedron elements at the part-insert interface should match each other perfectly. If this is not the case, the solver tries to correct it internally. If this automatic correction is unsuccessful, solver convergence problems can arise which may lead to poor quality results.

Resolution

Ensure that the geometries at the interfaces are consistent and that the insert facets are on the same plane and of a similar dimension to those on part.