This dialog is used to enter a packing profile to describe the pressure applied to the cavity during the packing phase of the injection molding process.
To access this dialog, ensure that you have selected an analysis sequence that includes Fill or Fill+Pack, click 
(), if necessary click Next one or more times to navigate to the Fill Settings or Fill+Pack Settings page of the Wizard, then click Edit profile next to the Pack/holding control option.
The parameters used to define a packing profile differ between different models and makes of injection molding machines. Therefore, a varied selection of input methods are available.
You can use shortcuts to edit the input data.
| %Filling pressure vs time | Controls the packing phase of the molding cycle as a function of percentage filling pressure versus time. Click on each box in turn to enter the time (duration) and percentage filling pressure values. |
| Packing pressure vs time | Controls the packing phase of the molding cycle as a function of injection pressure versus time. Click on each box in turn to enter the injection pressure and time values. |
| Hydraulic pressure vs time | Controls the packing phase of the molding cycle as a function of hydraulic pressure versus time. Click on each box in turn to enter the hydraulic pressure and time values. |
| %Maximum machine pressure vs time | Controls the packing phase of the molding cycle as a function of percentage maximum pressure versus time. Click on each box in turn to enter the time (duration) and percentage maximum pressure values. |