Solver message 1300620

Message text

** ERROR 1300620 ** Insufficient clamp force Suggested action(s): Choose an injection molding machine with a larger clamp force, Decrease the Velocity Phase Flow Rate Lower Limit.

Explanation

The Process Optimization analysis cannot optimize the injection profile because the required clamp force for the part is higher than the Maximum machine clamp force value. This value is found in the Clamping Unit properties for the current injection molding machine.

Resolution

Select a different injection molding machine, or adjust the clamp force for the current machine by selecting Analysis > Process Settings Wizard, click Advanced options, click Injection molding machine > Edit. Select the Clamping Unit tab and edit the Maximum Machine Clamp Force value.