Reactive Molding analysis log

The Analysis Log is a text report that lists the inputs that you used for the Reactive Molding analysis, including solver parameters, material data, process settings an model details, followed by the analysis progress tables.

There is a separate table for the filling phase, and for the curing phase of the analysis. The Analysis Log is generated by the Reactive Molding analysis.

Using the Analysis Log

The Analysis Log for a Reactive Molding analysis can be used to determine whether the part filled completely during injection before the curing phase began.

Look at the analysis progress table for the injection phase and check whether 100% of the cavity volume filled. If this did not occur, then you may see a message stating that the maximum machine injection pressure was reached and a short shot occurred.

Things to look for

Short shot
If this problem occurs, try changing the following process settings (in the order presented) and re-run the analysis.
  1. Melt and mold temperatures (primary).
  2. Fill time (primary).
  3. Pressure (secondary).
Parent topic: Reactive Molding analysis results