Solver message 301430

Message text

** WARNING 301430 ** No value specified for resin-to-hydraulic pressure ratio. Using default = resin to hydraulic pressure ratio.

Explanation

The value specified for resin to hydraulic pressure ratio in the Process Settings is outside the expected range, meaning that it is either too small or too large. The analysis will use the default value for the selected injection molding machine.

Resolution

  • Set the resin-to-hydraulic pressure ratio in the machine settings.
  • Select a different injection molding machine.
  • If the injection molding machine is from the Autodesk Simulation Moldflow database, contact Technical Support.