File extensions

Interface and result files can be identified by their file extension. The following table lists the purpose of each type of file. Files designated "temporary" can be safely deleted after the completion of an analysis.

Note: To recover disk space, use the Compact project command (File > Compact Project...) to delete unwanted project files.
Extension File type Purpose
amm Model file Model export format for transferring a Dual Domain surface mesh to Autodesk Simulation Moldflow Adviser
c2p Interface file, Cool analysis to Fill+Pack analysis for the following analysis technologies:
  • Midplane
  • Dual Domain
Stores the following information:
  • Cycle time parameters
  • Element top and bottom temperatures
  • Also stores element top and bottom heat fluxes
clm Result file, Cool analysis. MPI 2.0 cooling laminate results
cmz Interface file, Cool analysis to Fill+Pack analysis (3D) Stores the following information:
  • Cycle time parameters
  • Element top and bottom temperatures
  • Also stores element top and bottom heat fluxes
con Temporary intermediate file, Cool analysis Stores the data relating to system matrix indices for the Boundary Element method (BEM) solver
cr0 Restart file, Cool analysis MPI 2.0 Cool restart file
ctz Interface file, Cool (FEM) Stores time-dependent mold wall temperature results used in flow results.
die Result file, Fill+Pack analysis Stores the "Machine Setup" result
dsu Result file, Shrink analysis Stores all the results of a Shrink analysis
dum Temporary intermediate file, Wire Sweep/Paddle shift Interface extension for Abaqus
err Result file, all analyses Stores error messages for each analysis performed
fem Interface file, Autodesk Simulation Moldflow Insight to Abaqus Model data for Abaqus (C-MOLD / Abaqus 6.2 license holders)
flm Result file, Fill analysis MPI 2.0 fill laminate results
fpo Interface file, Autodesk Simulation Moldflow Insight to MPX Stores material, injection molding machine and process setup data for Moldflow Plastics Xpert
fr0 Restart file, Fill analysis MPI 2.0 end of Fill restart file
fts Result file, Fill+Pack analysis MPI 2.0 time series results
h3d Model file Altair Hyper3D format model file for storing Midplane, Dual Domain or 3D mesh and result data
hbr Restart file, 3D Fill+Pack analysis (MPI 6.0)  
inp Temporary intermediate file, Warp/Stress analyses  
jg1 Temporary intermediate file, Cool analysis Stores the g term Boundary Element method (BEM) integral for the average temperature calculation
jg2 Temporary intermediate file, Cool analysis Stores the g term Boundary Element method (BEM) integral for the temperature difference calculation
jh1 Temporary intermediate file, Cool analysis Stores the h term Boundary Element method (BEM) integral for the average temperature calculation
jh2 Temporary intermediate file, Cool analysis Stores the h term Boundary Element method (BEM) integral for the temperature difference calculation
jou Temporary intermediate file, Cool analysis Manages the jg1, jg2, jh1 and jh2 temporary files for the Boundary Element Method (BEM) equations
ls4 Result file Stores information for the paddle-shift interface
lsp Interface file, Warp analysis to Stress analysis Stores layer-based stress and thermal and mechanical properties
mab Interface file, Autodesk Simulation Moldflow Insight to Abaqus Input data for Abaqus (Autodesk Simulation Moldflow Insight / Abaqus 6.2 license holders)
m3i Model file MPI 2.0 format for storing 3D mesh
m3r Restart file, 3D Fill + Pack analysis (MPI 5.1)  
mfl, nda, ela, ata, ain Model file MPI 2.0 format for storing Midplane, Dual Domain and 3D mesh
mfr Results file Study result files for export to Autodesk Simulation Moldflow Communicator
mws Workspace settings file Stores a custom workspace configuration
oc1 Result file, Cool analysis Stores all cooling circuit results
ocs Result file, core shift analysis All core shift specific results
od1 Result file, DOE analysis Stores all XY plot results
od2 Result file, DOE analysis Stores all contour plot results
of1 Result file, Fill analysis Stores all filling phase results except weld line and air traps
of2 Result file, Fill analysis Stores weld line and air trap results
og1 Result file, Gas-assisted Fill+Pack analysis Stores all filling phase results
oic Result file, Injection-compression analysis Stores all filling phase results
oj1 Result file, Co-injection analysis Stores all results specific to a Co-injection analysis
oo1 Result file, Fiber orientation analysis For Midplane and Dual Domain models, fiber orientation data are stored during the filling phase. For 3D models data are stored at the end of the filling for a fill analysis, and at the end of packing for a Fill+Pack analysis
oo2 Result file, Fiber orientation analysis For Midplane and Dual Domain models, fiber orientation data are stored during the packing phase
op2 Result file, Pack analysis Stores all packing phase results
os1 Result file, reactive molding analyses Stores all filling phase results of a RIM, RTM or SRIM, Underfill encapsulation or Microchip encapsulation analysis
os2 Result file, reactive molding analyses Stores weld-line data
os3 Result file, Microchip encapsulation analysis Stores all wire sweep results
os4 Result file, Microchip encapsulation analysis Stores all paddle shift results
osp Interface file, Autodesk Simulation Moldflow Insight to Abaqus Residual stress and/or material property data for Abaqus (C-MOLD / Abaqus 6.2 license holders)
ot1 Result file, Gate location analysis Stores gate location analysis specific results
ot2 Result file, Molding window analysis Stores molding window analysis specific results
ot3 Result file, Runner balance analysis Stores runner balance analysis specific results
ot4 Result file, Process optimization analysis Stores filling phase results
ot5 Result file, Process optimization analysis Stores packing phase results
otc Result file, Cool (FEM) analysis Stores transient cool results
ott Result file, Cool (FEM) analysis Stores production start-up results
out Temporary intermediate file, Warp/Stress analyses  
ow3 Result file, Warp analysis Stores displacements and stresses
ow4 Result file Stores stress related results
pat Model file Patran format model file for storing Midplane, Dual Domain or 3D mesh
plm Result file, Pack analysis MPI 2.0 flow laminate results
ppc Interface file, Fill+Pack analysis to Cool analysis Stores melt temperature and heat fluxes
pr0 Restart file, Pack analysis MPI 2.0 end of packing restart file
rbc Interface file, Fill+Pack analysis to Runner balance analysis Element throughput and nodal pressure results from original Fill+Pack analysis
rfn Temporary project management file Stores the completion status of an analysis
rs0 Restart file, Fiber orientation analysis  
rsp Restart file, Fill+Pack analysis  
sdy Project management file Study file containing geometry, mesh, materials, injection location(s), process settings, solver parameters
stl Model file Model export format for visualization of a Midplane mesh in third party CAD systems
tsp Interface file, Warp analysis results to structural analysis packages Provides initial stress results for tetra elements for interfacing with structural analysis packages
udm Project management file Export of study to ASCII format file for support diagnosis
udm Project management file Compressed version of text udm
Note: To recover disk space, click Application button then Compact (Project > Compact) to delete unwanted project files.