** WARNING 702170 ** Bubbler inner element %7d has incorrect HTE specification. Using HTE of 0.0 in analysis
A bubbler is modeled using two segments, one to describe the inner channel and one to describe the outer annular channel. The inner channel does not contribute to any heat transfer between the mold and the coolant, and must therefore be assigned a heat transfer effectiveness (HTE) value of 0.0. The HTE value of the specified element is not 0.0 and so the analysis will continue assuming a value of 0.0.
Locate the element specified in the message using Properties. Enter a value of 0.0 for Heat transfer effectiveness (HTE).
, right-click the element and select