Solver message 304840

Message text

** WARNING 304840 ** For simulation of gas-assisted injection molding, it is recommended that the part is meshed with at least 10 layers of tetrahedral elements through the thickness for acceptable accuracy.

Explanation

A gas-assisted injection molding analysis requires that the part be modeled with sufficient layers of tetrahedral elements through the thickness. The part has less than the recommended 10 layers of elements and so may be of an unacceptable accuracy.

Resolution

Remesh the part and specifying the Minimum number of elements through thickness to at least 10.
Note: Increasing the number of elements, while increasing the analysis accuracy, also increases the analysis time.