Solver message 701380

Message text

** WARNING 701380 ** Warnings were reported in the model. Mesh quality may be poor.

Explanation

The quality of the mesh is not very good and individual warnings have been issued on each element. It is recommended that the analysis is aborted at this point and the warnings on the individual elements be studied and corrected before rerunning the analysis. If the analysis is allowed to proceed, integration problems could arise or poor convergence in the solver could occur, leading to poor results in some areas of the part.

Resolution

Check the Analysis Log for specific messages relating to poor mesh quality. Select Mesh > Mesh Statistics to check for defects in the mesh and, if necessary, correct them using the Mesh > Mesh Repair Wizard and/or Mesh > Mesh Tools.