Arc by Angle tool

The Arc by Angle tool allows you to create curves when you are in the process of creating a new model or adding to an existing model. To access this panel, click (Geometry tab > Create panel > Curves > Arc By Angle).

The Arc by Angle command is used to create an arc or circle, using the center point, radius, starting angle, and ending angle that you specify.

Dialog elements

Center

Specify the center of the arc or circle you wish to create.

Either click directly on the model, or type the coordinate position in the dialog input box (e.g.: 5 10 15).

Radius

Specify the radius of the arc or circle you wish to create.

Either click directly on the model, or type the coordinate position in the dialog input box (e.g.: 5 10 15).

Starting angle

Specify the starting angle of the arc or circle you wish to create.

For example, to create a circle, set the starting angle to zero and the end angle to 360.

Either click directly on the model, or type the coordinate position in the dialog input box (e.g.: 5 10 15).

End angle

Specify the end angle of the arc or circle you wish to create.

For example, to create a circle, set the starting angle to zero and the end angle to 360.

Either click directly on the model, or type the coordinate position in the dialog input box (e.g.: 5 10 15).