You can run a finite element cool analysis on an existing a CAD/STL mold model. If you want to import a CAD/STL mold, make sure that the feed system and cooling channels have already been modelled, according to your CAD/STL design.
To import a CAD model, you will need Autodesk Simulation Moldflow Design Link 2015, or later, installed on your computer.
The first steps 1-4 will instruct you on how to import your model and feed system. Steps 5-7 apply to importing the mold. The same procedure applies to all the components you need to import.
- Click
(). - Browse to the folder containing your modeled part and runner system, select it and click Open.
- In the Import dialog, select Solid 3D from the mesh type drop-down menu.
- When importing a CAD model, confirm that the radio button associated with Direct Import using Autodesk Simulation Moldflow Design Link is selected, then press OK. The unmeshed model will appear in your Project.
- Click
() to add the mold. - Browse to the folder containing your mold, select the mold and click Open. The type of mesh will have been decided, based on your initial model.
- Confirm that the radio button associated with Direct Import using Autodesk Simulation Moldflow Design Link is selected, then press OK. The unmeshed mold will appear in your Project.
- Repeat this process for all mold components, such as channels. You will now need to create the 3D mesh.