A result summary showing the analysis inputs and the results of each phase of the analysis or analysis sequence is generated for each analysis that is performed.
Select Logs in the Study Tasks pane to view this summary.
Tip: If you ran a sequence, click on the tab(s) at the top of the result summary to view the summary for each analysis.
Logs
The Logs section reports various text results that relate to the analysis or analysis sequence. For specific information on a particular analysis, check the various Analysis Logs. For a Fill+Pack analysis, the following results are recorded to help you investigate the simulation.
The filling phase records the following results:
- Bulk temperature
- Wall shear stress
- Shear rate
The end of the filling phase records the following results:
- Time at end of filling
- Total weight
- Clamp force required
- Ram speed, recommended profile
- Bulk temperature
- Wall shear stress
- Frozen layer fraction
- Shear rate
The packing phase records the following results:
- Peak pressure
- Clamp force
- Total weight
- Bulk temperature
- Wall shear stress
- Volumetric shrinkage
- Total part weight
The end of the packing phase records the following results:
- Time at end of packing
- Total weight
- Bulk temperature
- Frozen layer fraction
- Volumetric shrinkage
- Sink marks, index