Solver message 1204030

Message text

** WARNING 1204030 ** Specified maximum design injection pressure is higher than the maximum machine injection pressure. Using 80%% of maximum machine injection pressure.

Explanation

The Maximum design injection pressure value in the gate location advanced options of the process settings is higher than the related machine capacity in the injection molding machine properties. When determining the gate location for the part, the maximum injection pressure should ideally be no more than 80% of the machine capacity to allow for additional pressure drops in the runner system.

Resolution

  • Decrease the maximum design injection pressure in the process settings.
  • Change the setting for the maximum design injection pressure to Automatic.
  • Increase the maximum machine injection pressure for the current injection molding machine.
  • Select a different injection molding machine.