Navigation Bar Page

Use the options on this page to customize the behavior of tools on the navigation bar.

Orbit Tools

Use Classic Orbit

Select this check box if you want to switch from the standard Orbit tool to the legacy behavior on the navigation bar.

Use Classic Free Orbit (Examine)

Select this check box if you want to switch from the standard Free Orbit tool to the legacy Examine mode on the navigation bar.

Use Classic Constrained Orbit (Turntable)

Select this check box if you want to switch from the standard Constrained Orbit tool to the legacy Turntable mode on the navigation bar.

Walk Tool

Use Classic Walk

Select this check box if you want to switch from the standard Walk tool to the legacy behavior on the navigation bar.

Constrain Walk Angle

When this check box is selected, the Walk tool will keep the camera upright while navigating. If this check box is clear, the tool will allow the camera to roll while navigating (resulting in behavior almost like the Fly tool).

Use Viewpoint Linear Speed

When this check box is selected, the Walk tool will respect the Viewpoint Linear Speed setting. In this case, the Walk speed slider will act like a multiplier.

When this check box is clear, the Walk tool will work independently of the Viewpoint Linear Speed setting, using a fixed value set with the slider.

Walk Speed

Sets the speed of the Walk tool from 0.1 (very slow) to 10 (very fast).