Adjust the viewable area for view ranges in plan views.
Parameter names, values, and descriptions for view ranges. Values are modifiable.
| Name | Description |
|---|---|
| Top | Sets the upper boundary of the primary range. The upper boundary is defined as a level and an offset from that level. Elements display as defined by their object styles. Elements above the offset value do not display. |
| Cut plane | Sets a height at which elements in a plan view are cut, such that building components below the cut plane display in projection, and others that intersect it display as cut. Building components that display as cut include walls, roofs, ceilings, floors, and stairs. A cut plane does not cut components. |
| Bottom | Sets the level of the Primary Range's lower boundary. If you access View Range while viewing the lowest level of your project and set this property to level below, you must specify a value for Offset, and you must set View Depth to a level below it. |
| View Depth |
Sets a vertical range for the visibility of elements between specified levels. In a floor plan, View Depth should be below the cut plane. In a reflected ceiling plan (RCP), View Depth should be above the cut plane. In a structural plan, View Depth is either below or above the cut plane, depending on View Direction. View Depth is below the cut plane when View Direction is down, and above the cut plane when View Direction is up. For example, if you are designing a multi-story building, you might have a floor plan for the 10th floor that had a depth to the first level. Use View Depth to display visible objects below the current level; such objects include stairs, balconies, and objects visible through holes in a floor. in a structural plan, use View Depth to display visible objects below the primary range with Beyond line style. The view can also be cut at the View Depth plane. |