Add a Wall Sweep

Use the Sweep tool to add a baseboard, crown molding, or other type of decorative horizontal or vertical projection to a wall.

1. Open a 3D or elevation view containing the wall to which you want to add the sweep.
2. On the ribbon, click (Wall: Sweep).

   Where is it?

   • Architecture tabBuild panelWall drop-down (Wall: Sweep)
   • Structure tabStructure panelWall drop-down (Wall: Sweep)
3. In the Type Selector, select the desired type of wall sweep.
4. Click Modify | Place Wall SweepPlacement panel, and select the orientation of the wall sweep: Horizontal or Vertical.
5. Place the cursor over the wall to highlight the wall sweep location. Click to place the wall sweep.
6. Add the wall sweep to adjacent walls, if needed.

   Revit preselects the wall sweep location on each adjacent wall.

   If you are in a 3D view, you can add a wall sweep to all exterior walls by using the ViewCube to rotate the view.

7. To start a wall sweep in a different location, click Modify | Place Wall Sweep tabPlacement panel Wall Sweep Restart. Move the cursor to the desired location on the wall, and click to place the wall sweep.
8. To finish placing wall sweeps, click Modify.